Pad readout for gas detectors using 128-channel integrated preamplifiers

A novel two-dimensional readout scheme for gas detectors is presented that uses small metal pads with 2.54-mm pitch as an anode. The pads are read out via 128-channel VLSI low-noise preamplifier/multiplexer chips. These chips are mounted on 2.8-cm*2.8-cm modules, which are directly plugged onto the detector backplane, delay-chained with jumpers, and read out sequentially. The readout has been successfully tested with a low-pressure, two-step, TMAE-filled, ultraviolet-sensitive ring imaging Cerenkov counter. A single-electron efficiency of >90% was observed at moderate chamber gains (<10/sup 6/). The method offers high electronic amplification, low noise, and high readout speed with a very flexible and compact design that is suited for space-limited applications.<
>